SmartScope
SmartScope
0.15.2.0

0.0

SmartScope free download for Mac

SmartScope

0.15.2.0
28 November 2019

Boost the development of your own electronics devices.

Overview

Everything you need to boost the development of your own electronics devices. SmartScope software combined with the Lab-Nation hardware is the oscilloscope in the world that runs on all major platforms: Windows, OSX, Linux, Android and iOS (with wifi bridge). Connect the SmartScope to pretty much any device!

The oscilloscope software supports the hardware and provides the following capabilities:

Oscilloscope Functions
  • Bandwidth 30 MHz -3dB point
  • Sample rate 2 × 100 MS/s
  • Channels 2
  • Max pre-trigger position 16 × full scale
  • Max post-trigger position Full scale
  • Max full voltage scale 10V/div ±35V input range
  • Min full voltage scale 20mV/div
  • Analog input range -35V, +35V
  • Max input peak-to-peak 40V
  • Signal coupling AC / DC
  • Precision 8 bit
  • Input impedance 1 MOhm // 10 pF
  • Waverforms 200 waveforms/s
  • Data delay to host Sample depth Up to 4 million samples per channel
  • External triggering
Logic Analyzer
  • Input channels 8
  • Input impedance 100kOhm // 2pF to GND
  • Sample rate 100 MS/s
  • Logic level 1,8 V to 5,0 V
  • Diode protection Bidirectional
  • Input data buffer 4 million samples
  • Waveforms 200 waveforms/s
  • Data delay to host Protocol decoders I2C, SPI, UART, I2S integrated User extensible
Wave Generator - Analog Output
  • Channels 1
  • Data rate Up to 50 MS/s
  • Output level 0 - 3,3 V Opamp driven
  • Output buffer Up to 2048 samples
  • Max slew rate 30ns/V
  • Step 13 mV
Wave Generator - Digital Output
  • Channels 4
  • Data rate Up to 100 MS/s
  • Output level 3,3 V or 5 V selectable
  • Output buffer Up to 2048 samples
  • Diode protected

What's new in SmartScope

Version 0.15.2.0:
  • Fix for blank screen at startup

Join over 500,000 subscribers.

Subscribe for our newsletter with best Mac offers from MacUpdate.

0 SmartScope Reviews

Rate this app: