MACUPDATE ADMIN  http://sunsky3s.s41.xrea.com/dmgconverter/index.html says:

"Version 5.0.4r2 Universal Binary dmg.zip format (5.0MB) (2009/6/27)"

So the proper thing to do is to contact the developer and not post here with such matters.  
(Version 5.0.4r2)

ANONYMOUS  Version 5.0.4r2 replaces the translation of German.

There is no change in the application.  
(Version 5.0.4r2)

BIDULE  Strange… The archive unzipped, but after, the "DMGConverter 5.0.2.dmg" can't be opened on PPC 10.4.10 , even with Pacifist 2.0.1. I opened it on Intel 10.4.11 and then, the app works perfectly on both systems, PPC 10.4.10 and Intel 10.4.11, and I can open created dmg on 10.4.10PPC too.

Thanks !  
(Version 5.0.2)

BIDULE  Same warning on Intel 10.4.11 and PPC 10.4.10. I'm afraid it's Leopard only, works on Intel Leopard.  
(Version 5.0)

ANONYMOUS  This problem seems to occur if it uses DMGConverter with MacOS10.4.x.

I plan to fix this problem by the next version.  
(Version 5.0)

MACUPDATE ADMIN  I assure you it is a valid widget, try downloading it again using another browser.  
(Version 3.2)

TOMDOHERTY  Same error/warning when downloaded with Firefox and Opera!! (Downloaded updated Currency Converter widget earlier ...no problem) Strange one eh!  
(Version 3.2)

SASHAZEN  It just downloads with the wrong extension. Rname from .wgt to .zip, unzip it, then you can install it.  
(Version 3.2)

TOMDOHERTY  Worked a treat ...thanks so much for the solution.  
(Version 3.2)

DINKY2  Maybe when somebody reports a problem is it wise to check if this person might be right instead of claiming everything is allright ...  
(Version 3.2)

HABANITA  Hi ! Thanks for this useful comment ! Have you checked in the 'sent box' of the gmail website. if everything has been successfully sent ? If yes, can you check the 'more details' option on one of your sent message and see if the destination address has been correctly transmit by MMF ?

thanks again, u can write me at : magic.mail.folder@gmail.com  
(Version 1.1b2)

TOMDOHERTY  No, no, you misunderstand me completely ...I create a folder on my computer with a file name that is an email address, say xxx@mac.com or xxx@gmail.com or xxx@eircom.net. I then put in a file to send via MMF. MMF sends the file in each case and in doing so creates its own 'Sent' folder within the original (as it always has done before). I get a screen message from MMF to say that the file(s) has been sent ...however NO files have been received by the people I sent them to!! Prior to yesterday's upgrade these very same people have been receiving my files via MMF without any problems. Nothing has changed except MMF!!!!  
(Version 1.1b2)

SATYRICAX  YOU don't understand. Read and listen to the DEV's suggestion, which you DID NOT.

He want you to check your outgoing mail's account to see if it made it. This app simply

provides a creative GUI/process which utilizes YOUR OWN email account to send.

RTFM!  
(Version 1.1b3)

HABANITA  No, this is the 1.1b  
(Version 1.1b)

TOMDOHERTY  Just checked a few minutes age and downloads still yield v1.0 ...all filed in the .dmg (which is named 'Magic Mail Folder 1.1.dmg') have identical names, creation dates etc as those I downloaded with v1.0 back in April!!  
(Version 1.1b)

JOESANDWICH  The app says 1.1 when you open it (right under the logo)  
(Version 1.1b)

JOESANDWICH  Yes, it should be written under the logo. Thanks for pointing me out this issue. The truth is that I didn't update the cocoa informations of the App. I only changed the code that is located inside. It seems that i am also a BETA-developer ;-)

Thanks again for your interests. I am widely open to any improvement ideas and suggestions !  
(Version 1.1b)

JROULEAU  Because Microsoft AutoUpdate is somewhat less than reliable. Visit the MS-Mac site mactopia.com every few months and you'll find some update.  
(Version 11.5.3)

EASER  I have discovered that it is, but only in a very convoluted way. I have to open MS Word and choose "look for updates" through that program. It then opens the auto update program and find the update. However, it then won't let me install the update until I first quit MS Word. I also found with Office 2008 that between the first install and the most recent update, I now have 88 - yes, 88 - receipts just for Office in my Library/Receipts folder. Truly remarkable.  
(Version 11.5.4)

BRAINGUY  Many seem to be having this problem and no word from MacUpdate.  
(Version 2.1.2)

MACUPDATE ADMIN  Yesterday I called this to the attention of the persons in charge of such matters. I use MUMenu too, and have been disappointed that it is not working.

I am told that it is currently being worked on. A fix should be along any time now. Sorry for the inconvenience.  
(Version 2.1.2)

TOMDOHERTY  Thanks Admin, I really appreciate the speedy response ...and ultimate resolve. Cheers.  
(Version 2.1.2)

MACUPDATE ADMIN  It is working again now, at least for me it is, at this moment.  
(Version 2.1.2)

TOMDOHERTY  Roger that. I just sent the order to go to 'Code Green' and the troops are returning to base as I type!! Over and out.  
(Version 2.1.2)

AKROBAT  Yeah, it's a social sharing app. Means that you can have more space if you allow your computer to be used for space also.  
(Version 1.0)

CA  Same here :(  
(Version 1.5.2)

TIAGO  Same thing here...  
(Version 1.1.1)

EEFF  no issues whatsoever...looks like an issue on your side  
(Version 1.1.1)

ARKAYN  Just updated from the system preferences with no problem.  
(Version 1.1.1)

CORPSECORPS  No go for me.

When i tried it, it downloaded okay and said it was installing. The Prefs window came up and then the dialog to enter an admin password.

The admin password window kept blinking at a fairly quick rate and it was impossible to get the cursor to stay in the box, and thus i couldn't enter the password.

Finally i just downloaded it and installed it by hand.  
(Version 1.1.1)

HOLYPOLY  Corpsecorps -

that sounds like a Finder issue to me. Try to run the newest Combo updater (Tiger, Leopard, whatever you're running) and see if that cures the blinking window.  
(Version 1.1.1)

JAZZYGUY  Hi Tom, I wish I could help you but I had the previous version on another Disk and i copied it to the one I had. I think the developer will correct this soon.   
(Version 2.5)

NUTTDAN  This should now be fixed. Thanks!  
(Version 1.5)

MACUPDATE ADMIN  "Latest free Mac OS X Demo (3.1.6.11178 - August 16, 2008)"

http://www.datarescue.com/photorescue/v3/try.htm  
(Version 3.1.6.11178)

DEMORAY  I second this comment. Great little app, wish the developer supported Tiger.  
(Version 1.10)

PATRICK CHAMELO  Hello there!

I am waiting my 10.4 disk to come so I can write it properly!

It won't take to long!

Hopefully by the end of this week!!!  
(Version 1.10)

SAMSOFTWARE  Could please send me an email containing exactly what happens because personally I don't use MSN messenger, preferring Adium myself, and don't have a working MSN account so I cannot test that exactly, from what I can test it opens MSN messenger and prompts me with an username and password window to login.  
(Version 1.4)

SAMSOFTWARE  hmmm, odd since I have it working fine on my machine, check the name of your MSN Messenger application. it should read "MSN Messenger" exactly or it will not be picked up. I will look into it.  
(Version 1.2)

TOMDOHERTY  Ok. Changed the app's default name from 'Microsoft Messenger' to 'MSN Messenger'. Office Dock now launches Messenger ...but that's it!! Messenger no longer opens the Personal Contacts dialogue box and automatically signs in like it does when I launch it straight from the OS X Doc.  
(Version 1.2)

SAMSOFTWARE  Yes, I am looking into why it does that, I have found a few other applications that do similar things when launched in this method. Warcraft III in-particular has trouble launching when it is opened via a dock menu.  
(Version 1.2)

TOMDOHERTY  Thank you for such a speedy response. Best wishes in resolving the issue.  
(Version 1.2)

TOMDOHERTY  Just downloaded v1.4. The problem still exists with MSN Messenger (i.e. Office Dock launches Messenger ...but does not opens the Personal Contacts dialogue box and automatically signs in as it does when you launch it straight from the OS X Doc). All other Office apps work perfectly. Thank for your continued improvements.

PS. The iLife Dock is great also. Can't wait to see an Adobe Dock, a Utilities Dock, a...!!  
(Version 1.4)

MACUPDATE ADMIN  You should contact the developer, of course...

http://antell.com/software/support.html  
(Version 1.1)

LRKIRSCH  I can't open it either. 10.4.11 on a Power Mac G5. Check out console.log when you try to open Stunt Copter; for me it looks like some kind of a java error. I'm going to paste it into my e-mail to the developer. I couldn't find a specific crash.log for it.  
(Version 1.1)

MACUPDATE ADMIN  So, contact the developer of Keywurl as it requests you to do.  
(Version 1.3.3)

MACUPDATE ADMIN  http://purefiction.net/keywurl/

email addy at bottom of page  
(Version 1.3.3)

NICOSUAVE  @TOMDOHERTY

I had this same issue and figured out that it's a problem with the Keywurl.bundle file that for some reason is hard coded only to support Safari build 5528. It's easily fixed.

-Go to /Library/Application Support/SIMBL/Plugins/Keywurl.bundle

-Right-click and select "Show Package Contents"

-In the Contents folder, open Info.plist in TextEdit and you'll see a section that looks like this:

BundleIdentifier

com.apple.Safari

MaxBundleVersion

5528

MinBundleVersion

5528

I have Safari Version 3.2.1 (5525.27.1) which is build 5525, so I changed the second 5528 (MinBundleVersion) to 5525 and save the file. Restart Safari and Keywurl works perfectly!  
(Version 1.4b3)

RUNAWAY  The 2.x versions add "only" a new interface (because of port to AppleScript Studio) and if you have already patched your quicktime don't need this new version.  
(Version 2.1)

MSWFUJOWDFFYC  Run the app, ignore the source code.  
(Version 2.1)

JCRAIG  2.1 doesn't add anything. It's just a change in the script itself. "Nothing to add" means exactly that.  
(Version 2.1)

TOMDOHERTY  Thank you for such a quick reply. Not being expert in these matters - exactly what am I supposed to do with what I downloaded, i.e. the 'Perian's Type Installer.app' and a folder called 'Perian's Type Installer (Source code)'?  
(Version 2.1)

MACUPDATE ADMIN  It was posted then pulled per developer request, 0.5 is the most current version at this time.  
(Version 0.5)