DRKILMER  Downloaded it, and it said it would not perform the update because my hard drive was not formatted in an acceptable format. Do I REALLY need to reformat my hard drive so I can install this? What a PITA.  
(Version 1.2)

DRKILMER  Perhaps the lamest app I have ever purchased. Whay a waste of money. There is no built in comics formatting ... this is just a listing program. There's no way I would have bought this had I been able to see it first. Useless.  
(Version 1.0)

DRKILMER  Jeez. For many years I've implemented every software update Apple has put out for all my machines, and I've never run into any big problems. This one, as usual, worked seamlessly.   
(Version 2007-004)

DRKILMER  Does anybody know if this program can import info from my old Mac Paf program?? I'd love to try iy, but I hate the thought od having to re enter my thousands of data entries.  
(Version 4.4)

DRKILMER  I recently switched to Super Duper after having used Carbon Copy Cloner for quite a while. I find Super Duper to be very easy to use and it seems to do a great job for me on the 4 computers I tend to at my home. The only disappointment I have with it is that I am now unable to schedule automatic backups. Yes, I know it supposedly can be done by scheduling the computer to come on, through Energy Saver, but that does not LOG you on, and you must be logged on for it to work. I am not willing to leave my account logged on indefinitely. With CCC I was able to schedule these back ups and they worked without my having to be logged on. Oh well ... I can do manual backups I suppose.  
(Version 2.1.3)

DRKILMER  It's a fantastic resource. Download it and use it ... the improvements will come along in time. I like it a lot.  
(Version 4.0.1658)

DRKILMER  I installed the update on my G4 iBook and so far there have been no problems. I have not noticed any improvements, either ... but I didn't expect to. Seems to be working well for me.  
(Version 10.4.7)

DRKILMER  Hmmmm ... I repaired permissions no problem ... installed the update ... ran permissions AFTER and got a huge list of changes. Seems like OSX does NOT automatically run repairs after installation. Just run it. How long can it take?  
(Version 10.4.7)

DRKILMER  Installed on my iMac (333 G3 upgraded to G4) OS 10.3.9 and thus far no issues. Also installed on my 1.42GHz iBook (OS 10.4.6) and no issues there either.  
(Version 2006-003)

DRKILMER  Thanks. I found the work around ... it just seems more than a little weird to have to use a work around to run Apple Disk Utility with Apple iTunes installed where it's supposed to be. Pretty shabby.  
(Version 6.0.3)

DRKILMER  Downloaded this on my G4 this morning. Repaired permissions prior to install. Did the install. Ran permissions again and it stalls and gives the message "Disk utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility". This problem was introduced with 6.0.2 and I was HOPING it was fixed by this version. Guess not. Others havd had this problem, too (see Macfixit articles). Vert disappointed!  
(Version 6.0.3)

DRKILMER  Downloaded and installed the update this morning on my G4 1.42GHz iBook. Repair permissions ... install ... repair permissions again. Thus far a seemless update. No problems to note.   
(Version 10.4.5)

DRKILMER  AAARRGGHHH!! I just updated from the last version (2.5.9?) and it losy ALL by brew recipes!! All the other updates worked fine. No ... i didn't have backups ... dammit. BE CAREFUL if you update to this version!!  
(Version 2.6)

DRKILMER  Downloaded this from Apple software update on my G4 this morning. Repaired permissions prior to install. Did the install. Ran permissions again and it stalls and gives the message "Disk utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility". I see there is info at Macfixit that this problem seems to have happened to others, particularly with OS 10.3.9. Never had trouble with software update before. I'm not happy.  
(Version 6.0.2)

DRKILMER  Wow. This is a great program for the mac. I've been playing around with it for a day or two, inputting my recipes and getting familiar with the program. Can't wait to try it out on brew day. It's obvious this program was built by brewers. And it's free. Thanks!!  
(Version 2.5.1)

DRKILMER  Been using MTR for a while now with Popcorn and it mostly works just great. Only problem is that the discs I burn sometimes will not play on other computers or on some set top DVD players. I burned a disc of Smallville Season 1 and it worked great on my mac and on my set top player, but on a friend's PC it is extremely choppy and unviewable. On my Mom's set top unit it doesn't show any video at all. I've had similar results with other DVD's. THoughts?  
(Version 2.6.6)

DRKILMER  I went to the web site, input my email address, downloaded the update and it works great. This has FINALLY resolved a problem I was having with audio dropouts in 5.1 on my set top DVD player!! Gad, that was annoying. Thanks for the update, Roxio!!  
(Version 1.0.2)

DRKILMER  I have three macs on my airport network at home. A B&W upgraded to G4 500, and Imac 333 upgraded to G4 550, and a Sawtooth (G4 450) upgraded to G4 800. I repaired permissions, installed te combo upgrade, and repaired permissions again on each. All upgrades went flawlessly! The last upgrade (10.3.7) caused problems with slow startup ... seems to be fixed now.  
(Version 10.3.8)

DRKILMER  A little story about proper maintenance and bad Apple updates. My B&W is, I think, maintained quite well. Still, this Security Update hosed my Mail and Safari programs. OK ... let's assume it was due to poor maintenance.

So I get a "new" Sawtooth G4. It was upgraded to a G4 800, and a Maxtor 60GB drive was added alongside the stock Apple 10GB. There were no other mods. There are no firewire devices plugged into it. The keyboard is plugged into a USB port (stock Apple keyboard). The disks were initialized. I installed OSX, repairing permissions, etc. No problem, it ran just great. I installed this security update and now Mail and Safari will not launce. There's no WAT improper maintenance (or weird software, or anything else) can be blamed for this. It's very simple ... this security update hosed my apps. Wouldn't it be nice if all these people with superior attitudes would make constructive criticisms rather than just making a$$es out of themselves over and over again?  
(Version 2005-001)

DRKILMER  I had the same experience. Have you had any problems with applications taking FOREVER to open ... like Mail? I thought Mail was hosed, but it just sits there for quite a while prior to coming up now after installing this security update.  
(Version 2005-001)

DRKILMER  My slow startup was fixed by finding out Earthlink had changed the DNS numbers on me without telling me. When I inserted the correct DNS numbers in my airport setting, all was right with the world.   
(Version 10.3.7)

DRKILMER  This software does what I needed it to do ... publish a simple web cam to my web page. It works. Can't say that for some of the others. Support is fantastic, too.  
(Version 3.5pr1)

DRKILMER  The interface seems fairly simple and straightforward. I'd love for this to work ... unfortunately it simply refuses to connect to my FTP server. I'm using OSX 10.3.7.  
(Version 1.0)

DRKILMER  OK. I opened "network preferences" and turned OFF the ethernet connection, leaving airport and internal modem on. Now the long startup seems to be gone. I'd read somewhere else that there were problems with the ethernet connection slowing down the startup.  
(Version 10.3.7)

DRKILMER  Ran with default settings, and now mail says it is locked and may damage contents if opened. I have to force quit mail to get out. How do I fix this???  
(Version 3.5)

DRKILMER  OK ... guess I spoke too soon. Not long after installing 10.3.7 I began having problems. Started booting as Canadian once in a while for some reason, requiring hard reboot. Fixed that (I think), but I still have a problem with my disk icons taking around 2 MINUTES to show up on the desktop when I sign in. Doesn't happen every time. Anybody got a clue? Obviously I don't.  
(Version 10.3.7)

DRKILMER  Installed the update with no deleterious effects.   
(Version 10.3.7)

DRKILMER  I think I like it ... but it seems like it never wants to download the new comic lists. Kind of a pain in the @ss.  
(Version 1.4.1)

DRKILMER  This latest update seems to have rectified the problem I was having. Great program ... I use it all the time!  
(Version 0.4.4)

DRKILMER  I paid my shareware fee wit te last version of the game ... great game! We use it all the time. Can I download the latest version without paying again? How? The download here is a limited version.  
(Version 1.0)

DRKILMER  Running a B&W G3 with a G4 upgrade. I noticed no real changes after installing 10.2.8. Everything still works fine.  
(Version 10.2.8)

DRKILMER  Backed up my startup disk to an external VST30GB drive. The first two tries, it hung up and did not finish. The third time, I reformatted the external drive with Apple Disk Utility and tried again ... worked just fine.   
(Version 2.2)

MARK  I've been using this software for a short time, and find it to be overall very simple and useful. My one complaint thus far is that, when I enter a new recipe, it does not show up in my recipe list until I quit the program and open it up again. Anybody else have this problem?  
(Version 0.4)