SPRINGHEELMAC  Screensaver aspect is now much improved. If a particular project does not have a screensaver attached to it, instead of the usual, "Screensaver not supported with this project" you will get a breakdown of all the projects you are involved with and your stats. It fades in and out with each currently running project.  
(Version 6.10.17)

SPRINGHEELMAC  6.10.17 is NOT a beta release. I just checked 'boinc.berkeley.edu'.  
(Version 6.10.17)

SPRINGHEELMAC  All in all a nice enough app, but it seems easier to just use "Safari/File/Save As..." and save whatever page to docs.  
(Version 1.1)

SPRINGHEELMAC  Hmmm... I also hit "reply" to the below and got a new comment instead.   
(Version 1.76)

SPRINGHEELMAC  I had the same problem and could not use the internet while sharing with any kind of speed. Forget about using Vonage. This being unacceptable, I thoroughly tested all versions and found 1.42 to allow sharing and decent browsing speeds at the same time. Its a little bit of a trade off though; something about the way 1.42 handles peers makes the timing of the sharing, um, a little random. Still, it allows me to "surf and share" so thats the version I currently use. And yes, I've tried ALL the versions available extensively before settling on that one. Also, prior to OS X 10.5.8 this wasn't always the case, so it may be a synergistic effect between the operation system version and Transmission.  
(Version 1.76)

SPRINGHEELMAC  The ONLY thing I don't like about it is you can't download to the same place the torrent file it at. I believe this is why there is always a problem with "hit and runs", because people download a file and then move it somewhere else before they seed. If they added this one thing, it might help. Transmission has this option and when I use it I place the torrent file where the file is supposed to go (say a folder labeled after a TV show) and continue to seed, even while I'm watching the completed download. That way I can even seed the file again later down the road without moving it. Other than that though, good program. I don't even mind there isn't a blocklist; that's what I have PeerGuardian for.  
(Version 0.9.2)

SPRINGHEELMAC  Try downloading the flash uninstaller from Adobe here:

'kb2.adobe.com/cps/141/tn_14157.html'

Then install the last Flash 9 from here:

'get.adobe.com/flashplayer'

Simply select "Flash 9" from the drop down. If you're having Flash issues on an older Mac and still want to see all the goodies, I highly recommend 9.0.246.0.  
(Version 10.0.32.18)

SPRINGHEELMAC  Try downloading the flash uninstaller from Adobe here:

'kb2.adobe.com/cps/141/tn_14157.html'

Then install the last Flash 9 from here:

'get.adobe.com/flashplayer'

Simply select "Flash 9" from the drop down. If you're having Flash issues on an older Mac and still want to see all the goodies, I highly recommend 9.0.246.0.  
(Version 10.0.32.18)

SPRINGHEELMAC  Adobe released another update to version 9; it's 9.0.246.0. It also has all the latest security updates like 10. Here's the link:

'get.adobe.com/flashplayer'

Simply select "Flash 9" from the drop down. If you're having Flash issues on an older Mac and still want to see all the goodies, I highly recommend 9.0.246.0.  
(Version 10.0.32.18)

SPRINGHEELMAC  Adobe released another update to version 9; it's 9.0.246.0. It also has all the latest security updates like 10. Here's the link:

'get.adobe.com/flashplayer'

Simply select "Flash 9" from the drop down. If you're having Flash issues on an older Mac and still want to see all the goodies, I highly recommend 9.0.246.0   
(Version 10.0.32.18)

SPRINGHEELMAC  Adobe released another update to version 9; it's 9.0.246.0. I prefer to use this on my PPC eMac as version 10 is a little too much for the old girl. It also has all the latest security updates like 10. It always me to still view all the material that is too choppy on 10. Here's the link:

'get.adobe.com/flashplayer'

Simply select "Flash 9" from the drop down. Also, one benefit over this one is the installation. Unlike 9.0.159.0, it is self explanatory. Open the file and it shows with arrows where the files go. Drag the two files to two folders and you're done. While not as fancy as a self installer, its still idiot proof. If you're having Flash issues on an older Mac and still want to see all the goodies, I highly recommend 9.0.246.0   
(Version 10.0.32.18)

SPRINGHEELMAC  Knopp, just review your previous posts and it'll be obvious I'm not being SILLY and ATTACKING anyone but just telling the TRUTH. Sorry if it hurts.  
(Version 1.74)

SPRINGHEELMAC  Try the last version 9 with an installer; 9.0.124. I've found that to be pretty good.  
(Version 10.0.32.18)

SPRINGHEELMAC  I can assure you that the auto update problem under 10.5.7 has been fixed. I had encountered it as well. Also, NAV was not even RUNNING under 10.5.7 for a few weeks after it came out. But I noticed it has been auto updating AND scanning successfully for a few weeks now. The fix was delivered via an update, so if you have the problem, hit "Update everything now" on your LiveUpdate app and make sure you install everything.  
(Version 7/17/09)

SPRINGHEELMAC  The blocklists all have been updating fine since about a week or two after the above comment with no problems whatsoever. Sorry for the late update. PeerGuardian works great at keeping known jerks off my system and out of my business. I highly recommend it.  
(Version 1.5.1)

SPRINGHEELMAC  Oh, I forgot to mention that I'm using 10.5.6. The 10.1 - 10.3 is just the minimum requirement I think.   
(Version 10.0.22.87)

SPRINGHEELMAC  I have a PPC eMac and Flash 9.0.159 works great on it. I stayed with 9.0.124 for a long time due to it being the last version 9 with an installer, but you can't listen to music on MySpace with it anymore so I upgraded to 9.0159. Its supposed to have better security anyway. I would suggest it; you can always switch back if you notice problems, but I haven't found any.  
(Version 10.0.22.87)

SPRINGHEELMAC  Transmission has been PERFECT the last several releases; however, 1.71 has displayed a decrease in upload speed I haven't seen since the pre 1.30's versions. Instead of the usual rock solid upload speed, I now see a constant decrease. Since I like to upload more than I download, I'm reverting to 1.70. Please fix as soon as possible; otherwise I see another KNOPP inspired Inquisition where every dissenter is deemed to be seeing things and incapable of operating their Macs intelligently without his EXPERT tutelage. Keep in mind Transmission has been THE torrent app; kudos to the developers and keep up the good work!   
(Version 1.71)

SPRINGHEELMAC  Has anyone tried this and compared it to "Boxer"?  
(Version 2.3.1)

SPRINGHEELMAC  Flash Player 10 is HORRIBLE on PPC Macs. That said, the best version out there for PPC is 9.0.159. This will enable you to utilize sites like Myspace and whatever else has been asking you to upgrade from 9.0.124 without having to install 10. Get it at 'http://get.adobe.com/flashplayer/'. Select "Flash Player 9 for System 10.1-10.3" from the drop down menu. The only problem is, it doesn't come with an installer. That's an easy enough fix; put the two items into "Library/Internet Plugins".

9.0.159 has the latest security features like 10, but its faster for us PPC users than 10. I was getting frustrated not being able to use some sites with 9 and 10 was totally hosing my system. With 9.0.159, I can have my cake and eat it too (for the time being, at least). Get it a shot.  
(Version 10.0.22.87)

SPRINGHEELMAC  Sweet! You guys AND the developer rock for adding this one day after I asked for it! Thanks!  
(Version 1.2.3)

SPRINGHEELMAC  Works great for me. I'm using 10.5.6 on a PowerPC 1.42 GHz eMac. Using it in conjunction with AppTrap (found here for free) is awesome. Finds EVERYTHING. I always do a Spotlight check after, but more often then naught, I'm good to go.  
(Version 1.8)

SPRINGHEELMAC  Awesome tool! If only the "Open/Close disc drive" menubar option can be added, I can delete Tinkertool entirely.  
(Version 1.2.2)

SPRINGHEELMAC  Great screensaver, but if you actually want to AID in research while you save your screen, I suggest BOINC.  
(Version 2.0)

SPRINGHEELMAC  HOWEVER, if you do not have PERIAN, install that. That DOES add functionality to Quicktime Pro.   
(Version 2.4.3_TigerFixed)

SPRINGHEELMAC  Damn, its gone and I really need this. Would anyone like to email it to me?  
(Version 0.4.2)

SPRINGHEELMAC  That's right, its propaganda! I forgot, the environment (and the damage we've done) really CARES about partisanship and won't do us in if we don't believe in climate change! Sweet! Just like those DUI radio commercials!  
(Version 1.0.1)

SPRINGHEELMAC  Two more things: If you join an account manager, like BAM, you can add as many projects as you want. Just hit 'About Boinc'; there's a like to BAM there off of Boincs site. I currently am attached to 12 projects, with 7 giving me units to process. There is always something running in the background. Also, the interface can be changed; go to 'View'. I prefer 'Advanced'. It categorizes better. 'Simple' view doesn't tell you anything.  
(Version 6.6.20)

SPRINGHEELMAC  No nifty screensaver? Not true. Want the SETI screensaver? All you have to do is ADD SETI. True, some of the other projects don't have a nice screensaver, other than a moving text message, but if that is important to you only install the projects you want!  
(Version 6.2.20)

SPRINGHEELMAC  This is one OS X enhancer I can't live without. Just one thing, how do you get to the screen to configure it? (Not to sound like a total TOOL but I can't find it.)  
(Version 1.61)

SPRINGHEELMAC  I WANT to like this widget, but I can't. There seems to be no way to actually READ the article, just the headline and about two lines. Could a link to the story or something be added? Like in gmail maybe? As it is, I'll just go to 'CNN.com'.  
(Version 4.0)

SPRINGHEELMAC  Ok, this might be a moronic question, but do you need a modded xbox to play the discs once you burn them or will they run on a standard 360?  
(Version 0.2g)

SPRINGHEELMAC  I have the same issue occasionally, even with older versions. I usually hit 'pause' as soon as the artifacts appear at the beginning of the movie. As soon as I hit play the movie plays fine with no issues.  
(Version 0.9.8a)

SPRINGHEELMAC  Wow... I get a "-5" just for commenting about having the same issue. That's awesome. Anyway, for anyone who cares, that issue has been fixed as of 1.50b3 (at least for me). And yes, I know what I'm doing with torrents. And no, I don't use a router.  
(Version 1.50b4)

SPRINGHEELMAC  Have you tried adjusting your upload and download rate while surfing?   
(Version 1.50b4)

SPRINGHEELMAC  I agree, that would be a nice feature. However, if you are concerned about your computer being idle, consider 'Boinc' or 'Folding@Home' (both available here). Both programs participate in "distributed computing" for good causes; basically, your computer processes data for research in various fields in the background during idle time (or continuously,if you so desire, that's what I do). Its a good way to avoid feeling guilty about leaving the computer running if you must.  
(Version 1.50b4)

SPRINGHEELMAC  "..better management of peers" under WHAT'S NEW above is an UNDERSTATEMENT!! I'm connecting to hundreds of peers now, something I've never been able to do before, even though I've always had Transmission's connectivity maxed out at 3000 peers. (Edit that in preferences, you won't be sorry.) In addition, my download speed has topped 1.0M, something I've never accomplished before. (It does decrease the upload speed, but once your downloads are finished, they will climb back up.) Try this version (1.50B4), you won't be sorry. Believe me, they have made improvements. The last beta was worlds better than anything since 1.34, and this version is the best one yet. I am truly impressed; I had almost given up on any new version of Transmission until the last beta. Fortunately I kept downloading the newest version and trying it out with known torrents, just in case. Lucky me.   
(Version 1.50b4)

SPRINGHEELMAC  BEST VERSION YET!!! I, like many others, was having the same slow download speeds since 1.34. No matter what I did or tried, I would get 1-2% of the speed of 1.34. Once switching back, it worked fine. I'm extremely happy to say that has finally been correctly addressed in 1.50b3. It works fantastic.   
(Version 1.50b3)

SPRINGHEELMAC  I have the same problem. The highest version which doesn't give me the problem is 1.34, which works fine. Not everyone is having this problem, so I don't know what the deal is.  
(Version 1.50b2)

SPRINGHEELMAC  Ok, I've added several lists from 'iblocklist.com' and they all update fine. For some reason just the lists that PeerGuardian comes pre-installed with are not updating.   
(Version 1.5b1)

SPRINGHEELMAC  On or about 30 Dec 2008, Peer Guardian stopped updating its block lists. I uninstalled and reinstalled, and now my block lists are even more out of date. Could all the different block list sites be down at the same time? That doesn't seem probable, but I've never had this problem before.  
(Version 1.5b1)

SPRINGHEELMAC  Maintidget 1.5 is not recording the date/time the last scripts were run for me. It just says, "Not yet run" for each script. I reverted to 1.4 and all is well. I'm using it on a 1.42 GHz PowerPC G4 eMac with 2 GB of RAM running OS 10.4.11.  
(Version 1.5)

SPRINGHEELMAC  I'm not sure what you're referring to, but try 'Expod' if this program doesn't work for you.  
(Version 0.50.2)

SPRINGHEELMAC  Whoops... Damn slow connection. I hate it when that happens. :P  
(Version 2.1)

SPRINGHEELMAC  Have you tried 'Freezer'? Its on this site, similar and free.  
(Version 2.1)

SPRINGHEELMAC  Have you tried 'Freezer'? Its on this site, similar and free.  
(Version 2.1)

SPRINGHEELMAC  Let me start by saying Transmission is the only torrent application I use. I've tried all the others and for one reason or another deleted each one in turn. (Vuse completely crippled my system with all of its extra BS.) That said, I've had problems with every version of Transmission since 1.22. I get fantastic upload 'seeding' speeds but terrible download speeds, if the torrents ever download at all. In addition I still get the infinite progress bar issue that stretches across the screen. I usually only get that now if I have Transmission set to open on login. I'd like to keep it that way since it's convenient. Quitting Transmission and opening it again usually fixes that problem, but not always. I try every version of Transmission for a few days, but I always end up uninstalling and going back to 1.22. Its a pain, as I have to re-attach the torrents I'm seeding. But once thats done, I see a dramatic increases in download speeds. With that said, I wouldn't trade Transmission for any other torrent app out there. 1.22 does everything I need it to do, and it does it well. I just hope I finally get a future version to work as well. I'm using a 1.42 GHz eMac with 2 gigs of RAM running OS 10.4.11   
(Version 1.41b3)

SPRINGHEELMAC  No, you aren't the only one. I am getting that as well, even with 1.40. I usually just exit and restart and its back to normal.  
(Version 1.40)

SPRINGHEELMAC  Did you try... here?  
(Version 2.3)

SPRINGHEELMAC  Any chance to get it to use USPS.com's address lookup instead? It's located at 'http://zip4.usps.com/zip4/welcome.jsp'. Considering that's the US Postal Service, I'd think it would be the most accurate.  
(Version 0.6)

SPRINGHEELMAC  Wow... I've been looking for something like this for years to use all my 80's software that's just sitting there and it's already gone the same day it went up. What can we go squeal on next?  
(Version 1.0)

SPRINGHEELMAC  Wow... I've been looking for something like this for years to use all my 80's software that's just sitting there and it's already gone the same day it went up. What can we go squeal on next?  
(Version 1.0)

SPRINGHEELMAC  Ok, I've selected some shows and hit subscribe. Now what? I used "Transmission" for my torrents and I don't see anything happening. What else are you supposed to do?  
(Version 0.3.4)

SPRINGHEELMAC  I love this program, but I'm not able to use it on 'hulu.com'. This isn't any fault of the program; I've tried numerous others with the same result. Has anyone else had any luck with this or any other program at 'hulu.com'?  
(Version 2.1)

SPRINGHEELMAC  In addition there is also "Himmelbar" and "XMenu" (my favorite).  
(Version 2008b062)

SPRINGHEELMAC  Yeah, I've tried doing it both ways. I actually got it to work with the pull-down menu the other day, but more often than not it just prefers to max out. Luckily for me the stuff I have on continuous sharing isn't wanted by most and my upload rate doesn't stay that high anyway. It's just frustrating because it USED to work for me and I wouldn't have to pause my transfers. I'm thinking its gotta be interference on my end from some other app, but its not really causing me any grief. Thanks for the advice. I'll keep messing with it when I have time and I'll post the solution for others having that problem if I ever figure it out.  
(Version 1.33)

SPRINGHEELMAC  The ones via the drop down menu in the lower left corner of the program when its displayed on the screen, located right next to the "Speed Limit" turtle icon. You select from pre-set values, and like I previously stated, these worked just worked fine until a few versions ago. The download or upload speed would adjust according. You can adjust your rate of transfer on the fly, which makes it very convenient if you need to suddenly raise or lower it. I like Transmission because it is very Mac-like and takes the work out of setting up torrents. I'll just do what I've been doing until the speed adjustment works properly - pausing my transfers when I really need to use the phone or surf some complex sites. But I appreciate your advice, if not your sarcasm. But thanks for making the problem sound a whole lot more complicated than it is.   
(Version 1.33)

SPRINGHEELMAC  Huh? I'm selecting from a drop-down menu. How again is it I'm supposed to specify between the two? Also, this wasn't a problem several versions ago, only recently.   
(Version 1.33)

SPRINGHEELMAC  CANNOT be beat. If you're not using this or something similar to donate your otherwise wasted cycles, you SUCK. I run it continuously in the background (rather than as a screensaver) on a 1.42GHz eMac with my CPU maxed out at 100% and never notice a loss of performance in my primary tasks. It's very easy to stop and restart later if you find it does impact a specific app or you can just leave it in screensaver mode. I recommend using it with MenuMeters or something similar if you want to keep an eye on CPU workload while its running. Very worthwhile program.  
(Version 6.2.15)

SPRINGHEELMAC  Ok, I've had a problem that has persisted through several versions. I kept hoping the latest version would fix it. Basically Transmission ignores me when I try to lower my upload rate. Now, I like to keep it at unlimited when I'm not browsing the web or using Vonage. I generally leave it on 24/7 because I donate my idle time through BOINC (available here at MacUpdate) and like to share files with Transmission. But when I use Vonage I need to lower the upload rate to conserve bandwidth and it isn't happening. What am I doing wrong? I've got a 1.42 GHz eMac running OS 10.5.4. Thanks in advance...  
(Version 1.32)

SPRINGHEELMAC  Hahaha! Good one Peter! Oh, and USBCat is great if you love cats...   
(Version 2.0.2)

SPRINGHEELMAC  Sorry about that; I figured it out. Visualhub saved the temp file as VISUAL_HUB.ISO in the same location as the original file. My bad. If anyone else had misplaced their Visualhub files, what I did was change the default save location to the desktop, so I always see it and delete it when I'm done burning. Makes it much easier than looking through a packed hard drive.  
(Version 1.34a)

SPRINGHEELMAC  Ok, its probably something I'm doing, but here it goes...

I select the files to burn to DVD, select "Author as DVD" and "Burn to DVD". Files being worked on are saved at the "same destination as original file." When VisualHub is finished, the DVD works great and the temporary file that was being converted on the hard drive is no longer there. Problem is, the available space on my hard drive is still showing that file as there. I've tried everything to find the temporary file and trash it, to no avail. Every time I use Visualhub my hard drive is getting fuller and fuller, by the exact size of the files I convert. What am I doing wrong? Any help would be appreciated.

Other than that, I love Visualhub. It can't be beat for what it does. I add it to my essential video tools list, right next to "Perian" and "Flip4Mac".  
(Version 1.34a)

SPRINGHEELMAC  Ok, I figured it out. If anyone was having the same problem, all you need to do is add the torrent again and hit "Verify Local Data". It checks it and viola! The file is back in business. If that doesn't work, you can also move the file to the area you designated as the place for your unfinished downloads and do the same thing. Hope that helps somebody. Transmission really is a great BT program. I also recommend using it with "Peer Guardian."  
(Version 1.22)

SPRINGHEELMAC  Absolutely the best torrent client out there. Gets past all those NAT problems I get with all the other torrent programs. I also like ability to use encrypted peers.

That being said, I'm having a problem that is 100% my fault. I recently had to wipe and reinstall OSX. When I attempted to reseed the torrents I had, Transmission did not recognize that I already had the programs they were connected to and wanted to re-download them when I opened the torrents. Is there a way to correct this without downloading everything again? I don't really want to create another torrent either, as that will make multiple copies of the same program available for download, which is a waste. Any advice would be appreciated.  
(Version 1.22)

SPRINGHEELMAC  Thanks!!! It worked great!!!  
(Version 2008)

SPRINGHEELMAC  Great program, but I ran into a problem. For reasons having nothing whatsoever to do with "Hide Folders" I had to wipe my internal drive and do a clean install of OSX. To my horror, upon re-installing "Hide Folders", the folder I had made invisible on my external hard drive can't be found. Even when I do a spotlight search I can't locate the invisible files (which I could even when the folder they were in was invisible before). Is there anyway to reverse this? I believe they are still on the drive, as the space available hasn't changed. Any help or suggestions would be appreciated.  
(Version 2008)

SPRINGHEELMAC  Perian opens all these and more. That and Flip4Mac and you can handle almost anything.  
(Version 6.7.2)

SPRINGHEELMAC  Gannet-I believe Perian has that and other codecs, which is on this site. Between that and Flip4Mac, Quicktime can be made to handle most anything. This program does sound like it has nice features though.  
(Version 3.7.15.6198)

SPRINGHEELMAC  I had the same problem, until I went into the prefs and adjusted the upload/download speeds. It helps to lower the upload speeds, at least until you get a complete file. Then when I'm done, I increase it while my computer is idle so others can get it quickly. It could also be the particular torrent. The one I tried was obscure and didn't have that many seeds, but I got it! Overall, I find BitTorrent to be my favorite; it does exactly what its supposed to do (upload and download torrents) and none of the other CPU-hoggin' crap!  
(Version 4.27.2)

SPRINGHEELMAC  Excellent addition to Safari! I hated using Firefox just to download videos. I have one question, though: how do you access the preferences? I was able to access them only once and now I'd like to change them. Also, can the prefs be accessed without hitting the download button?  
(Version 2.1)

SPRINGHEELMAC  'Himmelbar' is similar.  
(Version 2.1)

SPRINGHEELMAC  EUKON- Did you try the 'More Information' link above? Spells everything out in black and white. Did you really have to rate the program, considering you didn't know what you were doing?  
(Version 20070628)

SPRINGHEELMAC  Also check out 'Wallsaver'. It lets you use any screensaver as a desktop background.  
(Version 1.0.1)

SPRINGHEELMAC  Use 'Perian' with Quicktime instead. Its the only Quicktime component you need!  
(Version 0.8.6c)

SPRINGHEELMAC  'Himmelbar' is similar, but shows the icons as well.  
(Version 1.8)

SPRINGHEELMAC  NEXIALYS - I think some people actually liked the idea that they could use a simulated iPhone before the real thing was available. You know, better than nothing? Give the guy a break.  
(Version 1.2115)

SPRINGHEELMAC  I always attempt to rip a DVD with the latest version of MTR I have. Sometimes the newest doesn't work, and I just keep going down the ladder until one does. So far this has ALWAYS worked. I simply label them in my applications folder by version number. I suggest everyone does this, as I just had a disc that only version 2.6.6 was able to rip!   
(Version 2.6.6)

SPRINGHEELMAC  Oh yeah, sorry. I forgot to add that the problem I have occurs during "1:1 Copy Mode".  
(Version rev271)

SPRINGHEELMAC  Great program! Excellent for non-commercial DVD reproduction. Only one thing, and it doesn't really effect anything, it's more of a cosmetic thing - when I burn multiple discs, a "ghost image" of the last transfer stays on the screen. Can you fix this?  
(Version rev271)

SPRINGHEELMAC  Ok, I guess I'm an idiot, but can you put in a 'read me' file for installing? I can't seem to locate the library that the plugin goes into.  
(Version 0.3)

SPRINGHEELMAC  Wait for the spinning wheel to stop (believe it or not it WILL boot, takes about 10 minutes). Go do something else and come back. Once booted, everything will be INCREDIBLY slow. Go download 'Applejack' from here no matter what. Install and run. After that try Apple's Disk Utility' or 'DiskWarrior'. Problem should be fixed.  
(Version 1.5)

SPRINGHEELMAC  I can't seem to get my XBOX controller to work with MacMAME or MAME OS X. Is it compatible?  
(Version 10.4.5)

SPRINGHEELMAC  I can't seem to get my XBOX controller to work with MacMAME or MAME OS X. Is it compatible?  
(Version 1.0)

SPRINGHEELMAC  I can't seem to get my XBOX controller to work with MacMAME or MAME OS X. Is it compatible? Also, NANNASSY, I couldn't find a 360 driver here, but there is one at Versiontracker.com. (Too bad I don't have a 360 controller!)  
(Version 2.4)

SPRINGHEELMAC  I can't seem to get my XBOX controller to work with MacMAME or MAME OS X. Is it compatible? Also, NANNASSY, I couldn't find a 360 driver here, but there is one at Versiontracker.com. (Too bad I don't have a 360 controller!)  
(Version 1.3.3)

SPRINGHEELMAC  I can't seem to be able to use my XBOX controller with this, even though I've installed 'Gamepad Companion' and 'XBOX HID Driver'. What am I doing wrong?  
(Version 0.103u2)

SPRINGHEELMAC  I can't seem to be able to use my XBOX controller with this, even though I've installed 'Gamepad Companion' and 'XBOX HID Driver'. What am I doing wrong?  
(Version 0.114)

SPRINGHEELMAC  Works well. One question: when Jomic extracts the comic, where does it extract it too? Can the directory be selected? I noticed a considerable amount of space after extracting a comic, but could not locate it, although it was viewable just fine.  
(Version 0.9.25)

SPRINGHEELMAC  Ok, I installed and enabled, and it appeared to work. However, on restarting, I can't find Front Row ANYWHERE. I followed the instructions to the letter. Any idea what I'm doing wrong? BTW, I have a 1.42 Ghz eMac.  
(Version 1.5)

SPRINGHEELMAC  Great utility! WAY better than 'Stuffit' or any of the others, but please, PLEASE add '.sitx' to the list of formats it'll handle!  
(Version 1.5)

SPRINGHEELMAC  'Himmelbar' is similar. It allows you to keep the dock, and has allows full access to all your apps and utilities through two drop down menus.  
(Version 1.2.3)

SPRINGHEELMAC  TWOP, have you tried the "search" box here ? There are several free programs that will burn to DVD here. Off the top of my head I know one of them is "Burn". You'll have to look for others.  
(Version 2.6.6)

SPRINGHEELMAC  Ignore the negative comment below! This app is the BEST screen capture tool I've used. Works for ANYTHING, not just DVDs. Simply open it up, place the re-sizable screen on something and click it. It couldn't be easier! Kudos also for the different formats it allows you to save in. Great job!   
(Version 1.3.2)

SPRINGHEELMAC  This is exactly what I'm looking for; however, when it runs all the artwork is still in place. What am I doing wrong? I simply clicked on the script and ran it. Do I have to place the script in a specific folder? Please advise, I really need to clean up my iTunes. Thanks for the software though!  
(Version 0.2)