MACUPDATE ADMIN  Clear your browser's cache or use another browser and try downloading the file again. I just now downloaded the file using the link here at MacUpdate via Safari. It is version 1.00 beyond any and all doubt.  
(Version 1.00)

MACUPDATE ADMIN  Just now downloaded the .dmg at my location on the Pacific coast of Mexico and the image mounted with no issue on a MBP C2D/Safari Version 4.0.3 (5531.9), OS X 10.5.8.

Try clearing your browser cache and/or redownload or try another browser.  
(Version 2.0.0b43)

MACUPDATE ADMIN  Fixed.  
(Version 1.0)

MACUPDATE ADMIN  That has been my experience as well. Also, the drop-down calendar does not show as it should when I click on the date/time in my menubar. Not using this anymore until it gets cleaned up a bit.

2.4 GHz C2D MBP running OS X 10.5.8  
(Version 1.1r2)

MACUPDATE ADMIN  This version works fine for me, I downloaded it and launched it (2.4 GHz MBP running OS X 10.5.8) before I posted it to MU.  
(Version 11.1)

MACUPDATE ADMIN  Maybe try the old "delete the prefs file" trick.   
(Version 11.1)

MACUPDATE ADMIN  http://www.macorchard.com/email/PGPDesktop.php  
(Version 10.0)

MACUPDATE ADMIN  Try downloading again now, the file is now being hosted on our servers.  
(Version 0.9.7a)

MACUPDATE ADMIN  Try restarting your Mac and then try the download again. Maybe run your preferred system utilities to clean out your Mac. The problem appears to be at your end of things.  
(Version 1.1.5)

MACUPDATE ADMIN  Clear your browser cache and try again or try downloading with a different browser, I just now downloaded (using Safari Version 4.0.3 (5531.9), OS X 10.5.8) the x264Encoder 1.1.5 and the downloaded files are as they should be.  
(Version 1.1.5)

MACUPDATE ADMIN  From the developer's site: "The current version does not work on Snow Leopard !!"  
(Version 3.4.1)

MACUPDATE ADMIN  From the developer's site today:

"Due to circumstances beyond our control, Whimsicaly Plucky Software has to close it’s doors. I’d ike to take this opportunity to thank al of the users of BackityMac, RadiioRocker, DochChanger and VideoVangeist for their patronage. There is a possibility we may open the doors again one day. Until then I’ve updated all the products to remove all registration requirements and they are all now FREE. Any versions previous to these listed will no longer activate. You may stil email me if you wish, however, no further support for the products will be offered.

Sincerely,

DJ MacIntosh

djmacintosh@gmail.com"  
(Version 2.5.2)

MACUPDATE ADMIN  From the developer's site today:

"Due to circumstances beyond our control, Whimsicaly Plucky Software has to close it’s doors. I’d ike to take this opportunity to thank al of the users of BackityMac, RadiioRocker, DochChanger and VideoVangeist for their patronage. There is a possibility we may open the doors again one day. Until then I’ve updated all the products to remove all registration requirements and they are all now FREE. Any versions previous to these listed will no longer activate. You may stil email me if you wish, however, no further support for the products will be offered.

Sincerely,

DJ MacIntosh

djmacintosh@gmail.com"  
(Version 1.8.3)

MACUPDATE ADMIN  From the developer's site today:

"Due to circumstances beyond our control, Whimsicaly Plucky Software has to close it’s doors. I’d ike to take this opportunity to thank al of the users of BackityMac, RadiioRocker, DochChanger and VideoVangeist for their patronage. There is a possibility we may open the doors again one day. Until then I’ve updated all the products to remove all registration requirements and they are all now FREE. Any versions previous to these listed will no longer activate. You may stil email me if you wish, however, no further support for the products will be offered.

Sincerely,

DJ MacIntosh

djmacintosh@gmail.com"  
(Version 2.0.5)

MACUPDATE ADMIN  From the developer's site today:

"Due to circumstances beyond our control, Whimsicaly Plucky Software has to close it’s doors. I’d ike to take this opportunity to thank al of the users of BackityMac, RadiioRocker, DochChanger and VideoVangeist for their patronage. There is a possibility we may open the doors again one day. Until then I’ve updated all the products to remove all registration requirements and they are all now FREE. Any versions previous to these listed will no longer activate. You may stil email me if you wish, however, no further support for the products will be offered.

Sincerely,

DJ MacIntosh

djmacintosh@gmail.com"  
(Version 2.1.6)

MACUPDATE ADMIN  I downloaded the file and opened it to verify the download was good, then trashed it. The developer has since changed the download URL without informing us, nor can it be found currently. Sorry for the inconvenience.  
(Version 1.0)

MACUPDATE ADMIN  I downloaded the file and opened it to verify the download was good, then trashed it. The developer has since changed the download URL without informing us, nor can it be found currently. Sorry for the inconvenience.  
(Version 1.0)

MACUPDATE ADMIN  I downloaded the file and opened it to verify the download was good, then trashed it. The developer has since changed the download URL without informing us, nor can it be found currently. Sorry for the inconvenience.  
(Version 1.0)

MACUPDATE ADMIN  The parent post was nothing but a comment and not a review and should not have used the star ratings without explaining in some detail why the software should get a one-star rating.

The irresponsible parent post will be deleted shortly.  
(Version 2.0)

MACUPDATE ADMIN  Practically idiot-proof. I ought to know. Great free software.  
(Version 1.75)

MACUPDATE ADMIN  Option -click the window sizing button to minimize the iTunes window.  
(Version 9.0)

MACUPDATE ADMIN  Just tried the download link here on the MU page, works fine for me using 10.5.8 and Safari 4.0.3 (5531.9) at my location on the Pacific coast of Mexico.  
(Version 2.1.6)

MACUPDATE ADMIN  On this page http://www.ctmdev.com/ the developer states: PowerMail 6.0.3b1 – Snow Leopard compatible – download   
(Version 6.0.3b1)

MACUPDATE ADMIN  Confirmed: the Spotless 2.0.5 .dmg does not mount, at least not for you and me. Only the developer can fix the issue.  
(Version 2.0.5)

MACUPDATE ADMIN  I found a copy of the version 1.11 software but beware because it is not free and the developer has apparently disappeared.  
(Version 1.11)

MACUPDATE ADMIN  Download link works for me at my location on the Pacific coast of Mexico.  
(Version 2.6.3 RC1)

MACUPDATE ADMIN  You can use this email address to contact the developer regarding this matter:

info@d-lit.com  
(Version 0.99)

MACUPDATE ADMIN  Done, thanks for the heads up. It was submitted by the developer as "SimpeCap", so it's on him/her.  
(Version 1.0)

MACUPDATE ADMIN  Just checked the link and it works, slowly but it works. Must be the heavy demand on the developer's server(s).  
(Version 6.5)

MACUPDATE ADMIN  Apparently the developer made the last release candidate the final release.  
(Version 2.0)

MACUPDATE ADMIN  Fixed, sorry for the inconvenience.  
(Version 2.0rc)

MACUPDATE ADMIN  Thank you for making it very clear. Have a good day.  
(Version 3.6b8)

MACUPDATE ADMIN  You stated "Differences between the free version of OsiriX".

I'm confused.

Differences between free OsiriX and what?  
(Version 3.6b8)

MACUPDATE ADMIN  Try http://www.macupdate.com/info.php/id/19202/safariblock

I don't see any animated .gifs, and I believe it is due to SafariBlock.  
(Version 4.0.3)

MACUPDATE ADMIN  The COO (chief operating officer) of MU says:

"Surprisingly, that traffic is legit.

"We are the #1 result for mactheripper on Google, and the "official" MTR site has been offline for a couple years. So everyone who wants MTR comes to us. More than 100,000 page views a month, 90%+ of which come from Google.

"This is 2x more pages than the #2 (Glims, which points traffic to us deliberately!)..."  
(Version 2.6.6)

MACUPDATE ADMIN  OmniWeb is here:

http://www.macupdate.com/info.php/id/5166/omniweb  
(Version 10.0b3)

MACUPDATE ADMIN  http://www.macupdate.com/info.php/id/19202/safariblock has not been broken by the past several Safari updates.  
(Version 4.0.3)

MACUPDATE ADMIN  Download link fixed, sorry for the inconvenience.  
(Version 6.0.6)

MACUPDATE ADMIN  This is why.  
(Version 0.8.2)

MACUPDATE ADMIN  Fixed, sorry for the inconvenience.  
(Version 0.1.7)

MACUPDATE ADMIN  We know, we're working on it... some/many/all files hosted on our server are inaccessible at the moment.  
(Version 0.1.7)

MACUPDATE ADMIN  mbergmann@crosswire.org is the address we have for this developer.  
(Version 2.0b2)

MACUPDATE ADMIN  "I send the reports to Apple..."

You should not do that, Apple is not the developer of MacSword, you should send the reports to the developer.  
(Version 2.0b2)

MACUPDATE ADMIN  Just now uploaded the file to our server so it will always be available, thanks for the tip!  
(Version 1.0)

MACUPDATE ADMIN  Fixed the requirements, thanks for the heads-up!  
(Version 3.2b6)

MACUPDATE ADMIN  Try downloading with another browser, the download link works fine at my location on the Pacific coast of Mexico using Safari 4.0.2, OS 10.5.7  
(Version 1.2)

MACUPDATE ADMIN  Just checked the download link here at MU from my location on the Pacific coast of Mexico using a MBP running 10.5.7 using Safari 4.0.2 (5530.19) and it worked fine.  
(Version 1.0.4)

MACUPDATE ADMIN  You're very welcome. Thanks for the software!  
(Version 2.6)

MACUPDATE ADMIN  From the MacUpdate home page:

"Email client from Mozilla, version 3.0b3 available."

version 3.0b3 available now, today, new version.  
(Version 2.0.0.22)

MACUPDATE ADMIN  Fixed... thanks for the 'heads up'.  
(Version 1.1)

MACUPDATE ADMIN  On the MacUpdate product page it for MainMenu 2.0 it states:

"WHAT'S NEW

Version 2.0:

Can now force quit and restart applications, as well as restart your Airport. And all that in just one click."  
(Version 2.0)

MACUPDATE ADMIN  http://instaviz.com/instavue/

Developer page states 1.4 is available, contact the developer as only the developer can rectify the issue.  
(Version 1.4)

MACUPDATE ADMIN  The download link works, just checked it from my location on the Pacific coast of Mexico.

Try another browser.  
(Version 0.9.6r6)

MACUPDATE ADMIN  This is the official 3.5 release. It may be a earlier build that the mozilla folks decided to use for the final 3.5 release. Happens all the time with many different softwares.  
(Version 3.5)

MACUPDATE ADMIN  official, 3.5, not a release candidate.

http://www.macorchard.com/www/Firefox.php  
(Version 3.5)

MACUPDATE ADMIN  I learned almost all of my Spanish from my wife who died of cancer on April 2, 2009. May God rest her soul. I miss her so. Vaya con Dios, mi amor...  
(Version 2.1.5b)

MACUPDATE ADMIN  http://sunsky3s.s41.xrea.com/dmgconverter/index.html says:

"Version 5.0.4r2 Universal Binary dmg.zip format (5.0MB) (2009/6/27)"

So the proper thing to do is to contact the developer and not post here with such matters.  
(Version 5.0.4r2)

MACUPDATE ADMIN  "The zip file doesn't uncompress into a ready-to-install widget..."

Yes it does, at least on my three Macs. Try another browser to download it.  
(Version 1.0)

MACUPDATE ADMIN  http://www.kedisoft.com/contact.php may be of help.  
(Version 1.6)

MACUPDATE ADMIN  http://haoli.dnsalias.com/Saft/Installation/index.html:

Removal

Move Saft in /Library/InputManagers to Trash and restart Safari.

Finder may say that Saft is in use when trying to empty the Trash. Logout and login again (or restart mac) to solve this problem.  
(Version 11.0b (5530.18))

MACUPDATE ADMIN  We're trying to contact the developer, sorry for the inconvenience.  
(Version 2.0.5b1)

MACUPDATE ADMIN  try another browser  
(Version 1.5.1)

MACUPDATE ADMIN   Just checked, from the Pacific coast of Mexico, the developer site is accessible and the file is downloadable. The problem appears to be at your end, try another browser, clear your browser cache, restart your Mac, whatever works.   
(Version 3.0)

MACUPDATE ADMIN  Try here: http://forum.newsgator.com//  
(Version 3.1.7)

MACUPDATE ADMIN  Check here: http://www.obdev.at/products/littlesnitch/faq.html  
(Version 2.1.3)

MACUPDATE ADMIN  http://support.apple.com/downloads/iWork_09_9_0_1  
(Version 9.0.1)

MACUPDATE ADMIN  My experience is similar, I maintain our household's three Macs and have defragged them many many times with Drive Genius with no issues.  
(Version 2.1.0)

MACUPDATE ADMIN  http://www.macupdate.com/info.php/id/18245/8ball  
(Version 1.5)

MACUPDATE ADMIN  http://halcyondigitalresearch.webs.com/contactme.htm  
(Version 2.5)

MACUPDATE ADMIN  Ah, Jim... For shame! Windows XP?

Wish I could help you out comparing the softwares you mention, I have no experience with either.

(Disclaimer: "Mukinduri" is my brother-in-law)  
(Version 1.3)

MACUPDATE ADMIN  I assure you it is a valid widget, try downloading it again using another browser.  
(Version 3.2)

MACUPDATE ADMIN  Links updated, try downloading again, please.  
(Version 2.5)

MACUPDATE ADMIN  Please contact misha AT macupdate DOT com  
(Version Upgrade)

MACUPDATE ADMIN  Thanks for posting and for replying!  
(Version 7.4.1)

MACUPDATE ADMIN  Available through the recently-released AirPort Utility 5.4.1.  
(Version 7.4.1)

MACUPDATE ADMIN  Please contact nate AT macupdate DOT com  
(Version Upgrade)

MACUPDATE ADMIN  We'll host your download for free since it is freeware.

Go here:

http://www.macupdate.com/submission/search_listings.php  
(Version 2.6)

MACUPDATE ADMIN  It works, just now checked it.  
(Version 1.4.5)

MACUPDATE ADMIN  http://www.ambrosiasw.com/support/  
(Version 2.1.3)

MACUPDATE ADMIN  and the latest version is available here:

http://agile.ws/dist/1Password-2.9.9.BETA-11.dmg  
(Version 2.9.9b3)

MACUPDATE ADMIN  beaTunes Upgrade 2.0.0 $11.95

http://www.beatunes.com/beatunes-buy.html  
(Version 2.0)

MACUPDATE ADMIN  I dumped it as well. I wanted to like it, but could not... mostly due to the way it handles tabs. Reverted to latest 4.0 developer preview.  
(Version 4.0b1)

MACUPDATE ADMIN  Reverted to Version 4.0 (4528.1) (developer's preview) due to the way this new Safari handles tabs.   
(Version 4.0b1)

MACUPDATE ADMIN  "How well they work is really neither here nor there when the company resorts to dishonest tactics to sell them."

Completely in agreement. We'll be investigating, I've noticed some irregularities that have aroused my suspicions.

But about those two links: the e-zine link, that article seems to think nothing is amiss here.  
(Version 1.8.2.4)

MACUPDATE ADMIN  Yes. I left SafariBlock installed and it works with this Safari beta.  
(Version 4.0b1)

MACUPDATE ADMIN  Works perfectly on a C2D MBP running 10.4.11, seems faster. Wish the tabs were still below the bookmarks bar though.  
(Version 4.0b1)

MACUPDATE ADMIN  Or http://www.macupdate.com/info.php/id/30497/magnifique  
(Version 2.5)

MACUPDATE ADMIN  This is the iPlayer Downloader   
(Version 1.14)

MACUPDATE ADMIN  Mark Everitt: The post in question has been deleted. Thanks for bringing this to our attention.  
(Version 3.0.2)

MACUPDATE ADMIN  2.9.9 Beta 4 had a display issue and has been pulled from the developer's server.  
(Version 2.9.9b3)

MACUPDATE ADMIN  Not sure, but King Kong has a cameo role in one of the scenarios.  
(Version 1.0)

MACUPDATE ADMIN  http://www.maintain.se/cocktail/support.php

That's the developer's site, has much info.  
(Version 4.3)

MACUPDATE ADMIN  Just now checked the download link, it works just fine. Used Safari in OS X 10.4.11.  
(Version 1.0)

MACUPDATE ADMIN  That other site is wrong about the version number. It is not 1.0, it is 3.0.0.255 as anyone can verify from the downloaded file.  
(Version 3.0.0.255)

MACUPDATE ADMIN  A Google Earth Updater Plugin uninstaller is now available, see Editor's Notes near the top of this page.

Google says they are going to add it as an option to the installer very soon.  
(Version 5.0.11337.1968 )

MACUPDATE ADMIN  "Is there anyone listening??"

Yes, but I'm not sure anyone cares. More's the pity.  
(Version 5.0.11337.1968 )

MACUPDATE ADMIN  http://www.everydaysoftware.net/support/index.html  
(Version 1.6.4)

MACUPDATE ADMIN  The horse's mouth:

http://xbmc.org/support/

http://xbmc.org/forum/  
(Version 8.10)

MACUPDATE ADMIN  Latest non-beta release available here, version 2.9.7  
(Version 2.9.8b10)

MACUPDATE ADMIN  Try deleting its pref's file, it is named nl.alwintroost.WeatherDock.plist

Of course, you'll need to reset your prefs after deleting its .plist file.  
(Version 2.5.1)

MACUPDATE ADMIN  This seems to be a popular alternative: WeatherDock  
(Version 1.4.8)

MACUPDATE ADMIN  Fixed. Try downloading again.  
(Version 1.0)

MACUPDATE ADMIN  You can contact the developer(s) here:

http://jenniferandjon.com/software/index.php?main_page=contact_us  
(Version 1.0)

MACUPDATE ADMIN  It's the stuff that legends are made of  
(Version 1.5.5)

MACUPDATE ADMIN  Always good to be punctual  
(Version 1.5.5)

MACUPDATE ADMIN  Snafu  
(Version 1.5.5)

MACUPDATE ADMIN  woof woof woof  
(Version 1.5.5)

MACUPDATE ADMIN  There's an alpha version available here:

http://igtd.pl/iGTD/iGTD2/index.html

But even it is a year old.  
(Version 1.4.5.6)

MACUPDATE ADMIN  Not skewed at all. If you noticed, only one person that posted used the star ratings, the other posts were just comments. No stars.

More than obvious. Not skewed. The persons who posted negatively simply opted to not use the star rating.  
(Version 1.1.1)

MACUPDATE ADMIN  Tom.25, thanks for clearing that up.  
(Version 1.3.1)

MACUPDATE ADMIN  Please contact nate AT macupdate DOT com or misha AT macupdate DOT com  
(Version 2.7)

MACUPDATE ADMIN  Then you should contact the developer. This is not the developer site, we have no way of knowing what the developer has done in this instance.  
(Version 1.3.1)

MACUPDATE ADMIN  In the 'Related Links' section.  
(Version 1.3.1)

MACUPDATE ADMIN  Tiger version available here:

http://software.joelares.net/download/DHT_0.7.1.dmg

The above link was found at developer's site.  
(Version 0.8.2)

MACUPDATE ADMIN  Sorry. Was just trying to help.  
(Version 2.12.1-1)

MACUPDATE ADMIN  Have a look here:

http://ivo.bouwmans.name/lilypondleopard/  
(Version 2.12.1-1)

MACUPDATE ADMIN  As of the moment of this posting, the download at the developer's site yields version 3.1. The download here at MacUpdate yields version 3.1.1.  
(Version 3.1.1)

MACUPDATE ADMIN  This developer worked hard to make a version that would launch on my MacBook Pro C2D running 10.4.11.

Very nice! Thank you and Happy New Year!  
(Version 1.0)

MACUPDATE ADMIN  Just now tried latest version (408 KB) and on my MBP C2D (Intel) running 10.4.11, the app would not launch, sorry...  
(Version 1.0)

MACUPDATE ADMIN  remove the .bz2 suffix and the .dmg will mount  
(Version 3.0b9)

MACUPDATE ADMIN  Have you used Apple's Disk Utility to repair permissions? Have you used your preferred system utility to 'clean up' your Mac? I'm asking these things because I do not know what if anything you have tried to do to remedy the issue except for restarting your Mac.  
(Version 1.0)

MACUPDATE ADMIN  You really should contact the developer directly as soon as possible.

From the developer's website:

Report bugs, give feedback, or ask questions here: jnrh2001 (at) yahoo (dot) com  
(Version 2.0.3b)

MACUPDATE ADMIN  Found them, they're posted now.  
(Version 4.3.11528.8566)

MACUPDATE ADMIN  I am truly confounded by all these reports of defrag disasters. I've used this software to defrag my internal HDs and Firewire HDs for some years now and with several different Macs: iBook, PowerBook, MacBook Pro, iMac; PPC and Intel.

I currently have a 2 year old MacBook Pro (2.33 GHz C2D) with a Mercury Elite Firewire drive. I have Drive Genius installed on both HDs and use the Drive Genius installation on the external Firewire HD to defrag the internal MacBook Pro HD, and vice versa. I also use the very same Firewire HD in conjunction with our daughter's year-old iMac to defrag her iMac's HD.

Never had an issue.  
(Version 2.1)

MACUPDATE ADMIN  You should bring this to the attention of the developer at the developer's site. The developer submitted this update to MU as being 2.1.1. The developer is the only person who can rectify or explain the issue.  
(Version 2.1.1)

MACUPDATE ADMIN  You should bring this to the attention of the developer at the developer's site. The developer submitted this update to MU as being 2.1.1. The developer is the only person who can rectify or explain the issue.  
(Version 2.1.1)

MACUPDATE ADMIN  You should contact the developer with your problem.  
(Version 2.4.1)

MACUPDATE ADMIN  Notice: Suitcase and Mac OS X 10.5.6 Update

Extensis has received reports, indicating that Suitcase Fusion (v12.1.7) failed to run under Mac OS X 10.5.6, Apple's most recent System Update.

The cause of this was found to be an issue with Bonjour (formerly "Rendezvous") networking technology that is a part of Mac OS X. Changes to Bonjour networking in Mac OS X 10.5.6 resulted in a condition where Suitcase Fusion would fail to open.

To workaround the problem, users should shorten their computer's Bonjour name. For information on how to do this, see the following knowledge base article: Article # 7902230 - http://www.extensis.com/en/support/kb_article.jsp?articleNumber=7902230  
(Version 10.5.6)

MACUPDATE ADMIN  Try contacting the developer(s):

http://www.machangout.com/node/5  
(Version 1.0b11)

MACUPDATE ADMIN  http://www.id-design.com/software/whatsize/license.php

Developer's email address also available at above page.  
(Version 4.4.1)

MACUPDATE ADMIN  You can try to contact the developer:

http://homepage.mac.com/holtmann/eidac/software/smcfancontrol2/index.html

See the email address link near bottom left at the above page.  
(Version 2.1.3.1)

MACUPDATE ADMIN  Is it Aimersoft rebranded as iSkysoft or is it the other way around, or are they the same company with different websites, or what? Who knows.   
(Version 2.0.0.10)

MACUPDATE ADMIN  And while we're at it, why did this person post today when the companies in question have been submitting softwares to MU today? Who knows.  
(Version 1.8.2)

MACUPDATE ADMIN  Or is it the other way around, Aimersoft rebranded as iSkysoft, or are they the same company with different websites, or what? Who knows.  
(Version 1.8.2)

MACUPDATE ADMIN  Version 2.8.8 is the updated version for 10.5.6.  
(Version 2.8.8)

MACUPDATE ADMIN  You did not download from this site, the file resides on the developer server and the download link points to the developer server, so you downloaded from the developer's site, and the developer is the only one that can fix this issue.  
(Version 1.1)

MACUPDATE ADMIN  Try it again now.  
(Version 1.2b)

MACUPDATE ADMIN  http://www.xslimmer.com/contact.php  
(Version 1.6.2)

MACUPDATE ADMIN  FWIW means "for whatever it's worth"

In other words, my post was not meant to mean anything other than this software is also listed at apple.com. Nothing more nor less, nothing bad, good, or indifferent. A simple statement of fact and not an endorsement or recommendation of any sort.

I leave the red flags to others such as yourself.  
(Version 1.0.1)

MACUPDATE ADMIN  FWIW: http://www.apple.com/downloads/macosx/internet_utilities/pagerankviewerformac.html  
(Version 1.0.1)

MACUPDATE ADMIN  Where'd you get/find it? We'd like a copy so we can upload it to our server...  
(Version 1.1)

MACUPDATE ADMIN  Try this link:

https://secure.eve-online.com/ft/FreeTrialSignup.aspx?aid=103559  
(Version 5.20.71655)

MACUPDATE ADMIN  Just checked it, downloaded it with no problems from my location on the Pacific coast of Mexico, the .dmg mounts as it should. The issue would appear to be local to your rig.  
(Version 0.9.4)

MACUPDATE ADMIN  Contact the developer:

webmaster at innermindmedia dot com  
(Version 1.2)

MACUPDATE ADMIN  From the Intego support pages:

"to... uninstall Intego software, please use the Uninstall function provided by any Intego installer. This method will work for both licensed and trial versions of the Intego software."

"If you have already tried to manually uninstall portions of Intego software, this will lead to a partial uninstall, even if you used Finder spotlight search to locate Intego files. In this case, you will need first to reinstall Intego software before being able to proceed to a clean and complete uninstall."

http://support2.intego.com/kb/index.php?x=&mod_id=2&id=214   
(Version 10.5.5)

MACUPDATE ADMIN  From the Intego support pages:

"to... uninstall Intego software, please use the Uninstall function provided by any Intego installer. This method will work for both licensed and trial versions of the Intego software."

"If you have already tried to manually uninstall portions of Intego software, this will lead to a partial uninstall, even if you used Finder spotlight search to locate Intego files. In this case, you will need first to reinstall Intego software before being able to proceed to a clean and complete uninstall."

http://support2.intego.com/kb/index.php?x=&mod_id=2&id=214   
(Version 10.5.5)

MACUPDATE ADMIN  No problem at all downloading this file, I just now downloaded it here in my home on the Pacific coast of Mexico.  
(Version 4.0.3)

MACUPDATE ADMIN  From the developer's website, at bottom of the page:

"If you have any questions, comments, or feedback please contact: dan [at] danauclair [dot] com"  
(Version 1.1)

MACUPDATE ADMIN  Has to be the most fun music player there is...  
(Version 0.2.6)

MACUPDATE ADMIN  http://webkit.org/blog/173/webkit-achieves-acid3-100100-in-public-build/  
(Version 10.0a1)

MACUPDATE ADMIN  :) I know you meant to post this URL:

http://www.macupdate.com/info.php/id/29881/calaboration  
(Version 2.1.9)

MACUPDATE ADMIN  "...version 1.4 was posted in July 2008 yet it is only now that it shows up on MacUpdate."

Because the developer did not submit it to MU until today.

By the way, as of this moment no other site has this newest version listed. Only MU.  
(Version 1.4)

MACUPDATE ADMIN  http://www.fadingred.com/senuti/docs/Support  
(Version 0.50.2)

MACUPDATE ADMIN  Just this moment I accessed the developer site and downloaded the file, it has been uploaded to the MacUpdate server and is available for download...  
(Version 2.0.9)

MACUPDATE ADMIN  Nothing suspicious at all, they are old posts (years old) and therefore you can't check their profiles, as these posts pre-date our current review system. Further, the posts have greatly varying IP addresses associated with them. Nothing shady going on here whatsoever.  
(Version 1.2b)

MACUPDATE ADMIN  Indeed, crash reports (etc.) should be sent to the developer or posted at the developer's site.  
(Version 1.0)

MACUPDATE ADMIN  Here's Camino's help/support page:

http://caminobrowser.org/help/  
(Version 1.6.5)

MACUPDATE ADMIN  remove the .bz2 suffix from the downloaded file and the .dmg will mount  
(Version 2.0)

MACUPDATE ADMIN  Just an idea, have you tried deleting the Safari .plist file?  
(Version 3.2.1)

MACUPDATE ADMIN  Have a look at these:

http://www.macupdate.com/info.php/id/24120/caffeine

http://www.macupdate.com/info.php/id/10564/sleepless  
(Version 1.0)

MACUPDATE ADMIN  As I said, this has been fixed. If your MUMenu is still not working properly, delete its plist file:

com.macupdate.mumenu.plist  
(Version 2.1.2)

MACUPDATE ADMIN  The developer(s) finally got around to posting the release notes.

Version 5.0.3:

Fixed move permissions issue.

Fixed undo for copy/move as root.

Improved applications launch time.

Removed double size entry in column view preview.

Fixed problem mounting iDisk.

Added favorites list back to contextual menu when nothing selected.

Fixed the Close Window & Close All Windows menu items in File menu.

Imprvements to menu key editor prefs code.

Fixed option-click contextual menu on directories to show contents.

Fixed Path Navigator button drawing.

Fixed directory refresh issues.

Preview now previews Entourage email files.

Fixed close window with dual pane and tabs warning.

Image Editor no longer keeps file open after close.

Localization additions.

Removed Omni Frameworks which reduced application size and improved launch speed.

Fixed code signing.

Fixed icon previews to avoid drawing larger than original size.

Fixed purchase system slowness and crashes.

Increase max menu width for popup menus.

Added a thread to build favorites list.

Fixed show tab bar pref for dual browser.

Fixed recent apps and recent documents menus in Go menu.

Fixed screen sharing in Connect to Server window.

Fixed ejecting network volumes.

Fixed Reveal in Finder from iTunes  
(Version 5.0.3)

MACUPDATE ADMIN  Should be fixed now, sincere apologies for the inconvenience.  
(Version 2.1.2)

MACUPDATE ADMIN  http://en.wikipedia.org/wiki/RAR  
(Version 0.8.1)

MACUPDATE ADMIN  From the developer's website:

CONTACT ME:

Any feedback on usability or feature requests are welcome. Email audiobinder at mac dot com.  
(Version 0.9.1)

MACUPDATE ADMIN  http://unsanity.org/archives/mac_os_x/my_dmg_is_bwoken_after_download.php

If you download what should be a .dmg and it shows up on the desktop as a .dmg.bz2, you must remove the .bz2 suffix and then the downloaded .dmg will mount.  
(Version 6.0b1)

MACUPDATE ADMIN  I've downloaded this file three times today, the third time was just a few moments ago. Each time the .dmg mounted with no issues using Safari Version 3.2 (4525.26.12), OS X 10.4.11 on a MBP C2D.   
(Version 6.0b1)

MACUPDATE ADMIN  I've downloaded this file three times today, the third time was just a few moments ago. Each time the .dmg mounted with no issues using Safari Version 3.2 (4525.26.12), OS X 10.4.11 on a MBP C2D.  
(Version 6.0b1)

MACUPDATE ADMIN  "And now, the iKey developer web site is gone."

This software was updated only 6 days ago and the developer site is not 'gone'. I just now visited the site: http://www.scriptsoftware.com/ikey/  
(Version 2.3.2)

MACUPDATE ADMIN  *_BuhDumTsh_*  
(Version 1.0)

MACUPDATE ADMIN  An explanation of .bz2/.dmg issue:

http://unsanity.org/archives/mac_os_x/my_dmg_is_bwoken_after_download.php  
(Version 1.0)

MACUPDATE ADMIN  remove the .bz2 suffix from the download and the .dmg will mount  
(Version 1.0)

MACUPDATE ADMIN  Checked the developer's website, his blog states he has returned to developing Correo as of July 2008. That was some time ago now and still no update to the app. Whatever...  
(Version 0.3)

MACUPDATE ADMIN  _*BuhDumTsh*_  
(Version 0.3)

MACUPDATE ADMIN  The developer has a support page here:

http://www.pixelmator.com/support/  
(Version 1.3)

MACUPDATE ADMIN  Try downloading again now, I've just uploaded the file to the MacUpdate server.  
(Version 2.6b140)

MACUPDATE ADMIN  It is working again now, at least for me it is, at this moment.  
(Version 2.1.2)

MACUPDATE ADMIN  It is working again now, at least for me it is, at this moment.  
(Version 2.1.2)

MACUPDATE ADMIN  Well, imagine that... It is now working again.  
(Version 2.1.2)

MACUPDATE ADMIN  Yesterday I called this to the attention of the persons in charge of such matters. I use MUMenu too, and have been _very_ disappointed that it is not working.

I am told that it is currently being worked on. A fix should be along any time now. Sorry for the inconvenience.   
(Version 2.1.2)

MACUPDATE ADMIN  Yesterday I called this to the attention of the persons in charge of such matters. I use MUMenu too, and have been disappointed that it is not working.

I am told that it is currently being worked on. A fix should be along any time now. Sorry for the inconvenience.   
(Version 2.1.2)

MACUPDATE ADMIN  Yesterday I called this to the attention of the persons in charge of such matters. I use MUMenu too, and have been disappointed that it is not working.

I am told that it is currently being worked on. A fix should be along any time now. Sorry for the inconvenience.  
(Version 2.1.2)

MACUPDATE ADMIN  Please try to download again from this page, I've uploaded the file to the MacUpdate server.  
(Version 1.3.1)

MACUPDATE ADMIN  Please try to download again from this page, I've uploaded the file to the MacUpdate server.  
(Version 1.3.1)

MACUPDATE ADMIN  I've just uploaded the file to the MacUpdate server, try downloading it again now.  
(Version 1.2j)

MACUPDATE ADMIN  Developer just now submitted new info for this app, it is now designated as being for 10.5 or later  
(Version 3.0)

MACUPDATE ADMIN  Yes it does, I just downloaded it and I am running 10.4.11 and it unzipped with no issues.  
(Version 3.0)

MACUPDATE ADMIN  This developer is one of "the good guys". There are a lot of developers out there that charge eyebrow-raising prices for one-trick pony applications.

With this developer, you buy one of his apps and you have a whole stable of ponies. I believe this developer provides good value for a few bucks.  
(Version 1.0)

MACUPDATE ADMIN  Try downloading with another browser. I used Safari, the file downloaded with a .bz2 suffix (see this page for an explanation of why this happens) and when the .bz2 suffix is removed the .dmg mounts fine.   
(Version 2008r10)

MACUPDATE ADMIN  You must remove the .bz2 suffix from the downloaded file, then the .dmg will mount.  
(Version 2008r10)

MACUPDATE ADMIN  You mean version 2.1.3.1 is now available, not version 2.3.1.1.  
(Version 2.1.3.1)

MACUPDATE ADMIN  *BuhDumTsh*  
(Version 1.0)

MACUPDATE ADMIN  In the interest of full disclosure, everyone should know that F1RACER328 is the developer of iPaint.  
(Version 1.0v2)

MACUPDATE ADMIN  In the interest of full disclosure, everyone should know that F1RACER328 is the developer of iPaint.  
(Version 2.0)

MACUPDATE ADMIN  It most certainly does install version 13.0.2.

Furthermore, if it did not install version 13.0.2 then why are you the _only_ one to claim/complain out of 4,419 people (current download count for version 13.0.2) that it does not install 13.0.2?

Common sense, and the experience of having installed it myself on three different Macs and having verified that it installed version 13.0.2 says that you are wrong.  
(Version 13.0.2)

MACUPDATE ADMIN  See the home page for Transmission: http://www.transmissionbt.com/index.php

Do you see _any_ advisory that this version should not have been posted? No, because as of this moment there isn't one and there wasn't one when I 'discovered' this 1.40 beta version at the home page for Transmission, so naturally I posted it.

If it is on the home page with absolutely no advisory that it should not be posted to the usual sites then it is fair game.

Thus, it was posted here. End of story.  
(Version 1.40b1)

MACUPDATE ADMIN  Fixed, download now available.  
(Version 1.0.3a)

MACUPDATE ADMIN  Re-categorized as 'Commercial', thanks for the heads up.  
(Version 3.4)

MACUPDATE ADMIN  And hallelujah!  
(Version 1.1)

MACUPDATE ADMIN  You should try to contact the developer:

http://www.kedisoft.com/appshelf/index.html  
(Version 1.1.1)

MACUPDATE ADMIN  Thanks, and once again we apologize for the error.  
(Version 12.1.4)

MACUPDATE ADMIN  We sincerely apologize for having momentarily posted the wrong download URL for this 12.1.4 update. The download URL on this page now yields the English version. Please click on the 'More Information' link to download other language versions.   
(Version 12.1.4)

MACUPDATE ADMIN  Links updated, try downloading again now...  
(Version 1.40)

MACUPDATE ADMIN  Thanks for the URL!  
(Version 2.2b3)

MACUPDATE ADMIN  Remove the .bz2 suffix from the downloaded file and the .dmg will mount.  
(Version 1.0b54)

MACUPDATE ADMIN  Launch it and it will tell you that version 1.2 is available.  
(Version 1.2)

MACUPDATE ADMIN  http://hem.bredband.net/catacombae/ntfs-3g/macntfs-3g_userguide.pdf

that is the user guide available via the developer site  
(Version 1.5012)

MACUPDATE ADMIN  I've downloaded every version of FStream and never had any trouble mounting the .dmg.  
(Version 1.4.2)

MACUPDATE ADMIN  From here on the Pacific coast of Mexico I just now downloaded the file completely, and the .dmg mounted with no problems. The issue appears to be at your end of things.  
(Version 1.4.1)

MACUPDATE ADMIN  You posted to the You Control: Tunes page, but you are talking about TunesBar.

TunesBar is here:

http://www.macupdate.com/info.php/id/28190/tunesbar  
(Version 1.7.1b1)

MACUPDATE ADMIN  You may want to contact the developer for some help:

http://www.gyazsquare.com/gyazmail/support.php  
(Version 1.5.8)

MACUPDATE ADMIN  System requirements:

Mac OS X Leopard 10.5.3+ or Tiger 10.4.11+

Safari 3.1.1+

http://gears.google.com/?platform=mac  
(Version 0.4.22)

MACUPDATE ADMIN  This version of GIMP does not require X11, version 2.4.5r2:

http://www.macupdate.com/info.php/id/14597/gimp.app  
(Version 2.4.7)

MACUPDATE ADMIN  And where is version 3.2?  
(Version 3.1.10)

MACUPDATE ADMIN  You should have looked before you leapt. Your review is not valid (since the software is not stated to work with iPods), and will be deleted.  
(Version 1.1.3)

MACUPDATE ADMIN  From the developer's site:

Users should be aware of the following limitations in the current version of AccuBeatMix. Most of these limitations are due to iTunes' interfacing model.

no iPod support (yet!)

no CD support

no support for m4p (AAC protected) or other DRM-protected files

no equalizer support

no "Radio" support

no AirTunes support

Transitions are blocked while any window (e.g. track information) is open in front of the player window in iTunes.

not compatible with Volume Logic or SRS iWow  
(Version 1.1.3)

MACUPDATE ADMIN  Please don't forget to submit the new version to us here at MacUpdate, thanks!  
(Version 1.0b)

MACUPDATE ADMIN  From the update description:

"This update is also available via Software Update and will only be visible if the printer is connected to your computer or a print queue has been created for an earlier version."

Perhaps if you use Software Update it may give you only the driver(s) you need.  
(Version 1.1.1)

MACUPDATE ADMIN  http://www.macupdate.com/reviews.php?id=5661&pid=223818  
(Version 8.0)

MACUPDATE ADMIN  It is available here:

http://krzysp.net/download/Aion-1.8b2.zip  
(Version 1.7.2)

MACUPDATE ADMIN  If you bought this through MUPromo contact nate (at) macupdate (dot) com. He'll help you out, he manages things over at MUPromo. 5000+ people have received their licenses, but of course nothing's perfect so something may have gone awry for you. I am sure it will be squared away promptly!  
(Version 3.6.7)

MACUPDATE ADMIN  If you bought this through MUPromo contact nate (at) macupdate (dot) com. He'll help you out, he manages things over at MUPromo. 5000+ people have received their licenses, but of course nothing's perfect so something may have gone awry for you. I am sure it will be squared away promptly!  
(Version 3.6.7)

MACUPDATE ADMIN  If you bought this through MUPromo contact nate (at) macupdate (dot) com. He'll help you out, he manages things over at MUPromo. 5000+ people have received their licenses, but of course nothing's perfect so something may have gone awry for you. I am sure it will be squared away promptly!  
(Version 3.6.7)

MACUPDATE ADMIN  Ditto.  
(Version 8.0)

MACUPDATE ADMIN  Developer's site has a help page and a forum, see sidebar on left near top of page:

http://www.amule.org/  
(Version 2.2.2)

MACUPDATE ADMIN  Great post, doubtless it will help others. Thanks for taking the time to post it!  
(Version 1.59)

MACUPDATE ADMIN  It came and went and disappeared. No dream.  
(Version 3.0.5608)

MACUPDATE ADMIN  I launched XLD and it told me a new version is available, it said nothing about it being unofficial or a beta, it simply stated it was version 20080905 and displayed a changelist.  
(Version 20080905)

MACUPDATE ADMIN  Works here...  
(Version 8.0)

MACUPDATE ADMIN  Volume Logic:

http://www.macupdate.com/info.php/id/13252/volume-logic  
(Version 2.0.2.255)

MACUPDATE ADMIN  Links fixed.  
(Version 1.1)

MACUPDATE ADMIN  Dude, man... with all due respect, developers have sites with info and/or contact info for just such occasions... Bailed you out twice today, I believe:

http://haoli.dnsalias.com/Saft/Installation/index.html

Removal:

Move Saft in /Library/InputManagers to Trash and restart Safari.

Finder may say that Saft is in use when trying to empty the Trash. Logout and login again (or restart mac) to solve this problem.  
(Version 10.5.4)

MACUPDATE ADMIN  To the developer: Admirable policy. Too bad all developers don't offer similar liberal trial periods, though I suppose in some cases it is not practical  
(Version 1.0.5)

MACUPDATE ADMIN  From the Glims developer site:

http://www.machangout.com/

"Note to Saft users:

Using both Glims and Saft on the same browser could have unexpected results. Instead of spending time inquiring and fixing this, we decided to invest our time into improving Glims so that you can ditch Saft as soon as possible. Please feel most welcome to share your thoughts with us."  
(Version 10.5.4)

MACUPDATE ADMIN  My understanding of the development of this app is that the Adium crew have nothing more to do with it than providing the source code for anyone to use.

In this case, these folks have put it to their use:

http://www.freesmug.org/portableapps/adium/  
(Version 1.3r4.0)