D9  Is everybody seeing this update? I've got both an Airport Exteme 802.11n and an Airpot Express that both state that 7.4.1 is the latest update and that no 7.4.2 is available to download.

What's up with this?

/  
(Version 7.4.2)

FELIX01  Version 7.4.2 is available.

About Time Capsule and AirPort Base Station Firmware Update 7.4.2

The Time Capsule, AirPort Extreme, and AirPort Express Base Station with 802.11n* Firmware 7.4.2 update provides several fixes, including:

Fixes some problems with extending and maintaining connectivity with extended networks

Fixes an issue with clients that enable 802.11 "Power Save"

Fixes connectivity issues with some third-party devices

Fixes an issue when the base station is configured for PPPoE

Fixes some Back To My Mac issues with connectivity and support for third-party routers  
(Version 7.4.1)

BIGBOON  EUREKA!!!! To see how to downgrade away from this d@mned 7.4.1, go to this link for an instructional video. Should fix immediately.

http://mefeedia.com/entry/airport-extreme-and-time-capsule-firmware-downgrading/11537477  
(Version 7.4.1)

SLYDOGOZ  I recently updated the firmware in my time machine (to 7.4.1 I think), and now I can't connect. The airport on my MacBook spends all its time scanning but doesn't find my network; I can't even connect to the time machine by ethernet (I simply can't find a disk!) And now, I can't reset to factory (every time I start, the time machine tells me that there is a problem with the ethernet), and the ethernet link to the modem is now not operating.

Usually I am the biggest Mac fan, but this incident has really annoyed me. I may have to go out tomorrow, and get a basic airport express to act as a proxy until i can get the time machine issue addressed.

Has anyone else encountered anything like this?   
(Version 7.4.1)

WILE E.  I just allowed Airport Utility to check for, download, and then install the Firmware Update.

No problems here. Went without a hitch.

Total time took less than five minutes to check for the update, download it and restart the Airport Extreme.  
(Version 7.4.1)

BILLY THE BIKER  not needed?

I have a Time Capsule (7.3.2) and an Airport Express (6.3). In Preferences I have all the boxes checked for updating. If the amber light doesn't come on, does that mean I don't need the firmware update?  
(Version 7.4.1)

FRANKO  Updated both a first generation Airport Extreme (flat model previous to the Fast Gigabit) and the latest Airport Express without problems.

Restarting took a little longer so don't go pushing reset buttons or yanking the power plug. Let it be and it will flash green eventually.

Glad to see this update brings MobileMe Airdisk access (located as a tab under Advanced)  
(Version 7.4.1)

JMINNIHAN  Update nowhere to be found. Was it yanked for issues?  
(Version 7.4.1)

MGLAMB  Installed last night on both my AirPort Extreme and Express, no issues so far.   
(Version 7.4.1)

COMPLEX_PERSON  Typical apple, no fix for my airport express because its a little older with 802.11g. My iMac is maybe 5 feet away and looses its signal, I feel bad for everyone who spent $200 on apple's base station.  
(Version 7.3.2)

TURKCHGO  If you're having problems getting Time Machine to see you AirDisk, disconnect the disk from the AEBS and plug it into your Mac's USB port and launch Disk Utility and repair the disk.

After it repairs the disk plug it back into your AEBS and all should be well.  
(Version 7.3.1)

FOULGER  Still doesn't do anything for my USB drive connected to Airport Extreme BS after Firmware update. Mac Pro 2.6 QP 10.5.2 blah de blah  
(Version 7.3.1)

ZEALOT  Now allows USB drives connected to the Extreme to use Time Machine!!! Currently backing up to my Lacie 500GB Big Disk at 5+ MB per second! I still use Super Duper for bootable clones but it's nice to have AirDisk functionality back! Thanks Apple!!!  
(Version 7.3.1)

PSYCHOS  Upgraded from 7.1.1 to 7.2.1. All of a sudden, I couldn't connect to my wireless network. Checked config, did a hardware reset, no go. I get that "Try Again" message from my MBP.

I normally use 5GHz N-only mode. However, 2.4GHz mixed mode and 5GHz A/N mixed mode work fine!

I tried turning off authentication, with no help. I even reverted back to 7.1.1, and the same problems continued. Right now I'm running with A+N support to get the damned thing working at all.  
(Version 7.2.1)

** N8NOE **  Still waiting for DynDNS Support, but the Update was and went fine here..  
(Version 7.2.1)

WIZZARD1  Works fine, however VPN access (pass thru), etc is still not implemented and mac's can not access fat32 drives connected to the router.  
(Version )

LEE MAJORS  Can't connect after applying this firmware... not sure why. I usually never have any problems.  
(Version )