Your rating: Now say why...
- Download Now
892 KB -
Visit Developer's Site
Andreas Michalak
Powerlogix G3 Temp V064:
- works only with Powerlogix G3-750FX/GX, not with other CPU
- shows temp and MHZ value
- warns if temp is too high
- can stay in an animated (temp/mhz/warning colour) dock
What's New
Version V064: special Pismo Version (needs some other code getting real MHZ)
C/F calculation / warntemp C/F fixed
Requirements
PPC, Mac OS X 10.2 or later, Powerlogix G3 750FX/GX CPU, Powerlogix CPU director installed.
PPC, Mac OS X 10.2 or later, Powerlogix G3 750FX/GX CPU, Powerlogix CPU director installed.
Be the first to recommend a similar software title.
Powerlogix G3 Temp User Discussion (Write a Review)
Overall:
-
-
-
Powerlogix G3 Temp V064:
- works only with Powerlogix G3-750FX/GX, not with other CPU
- shows temp and MHZ value
- warns if temp is too high
- can stay in an animated (temp/mhz/warning colour) dock
Copyright © 2012 MacUpdate LLC
- -
Anonymous reviewed on 03 Aug 2004
I had to force-quit it because it kept bringing up the dialog box as soon as I closed it, and I couldn't close the main window with the dialog box up.
+69
The link works.
If someone get this error message , try downloading a bit later (10 minutes).
that wasn't the problem.
The download didn't fail.
The software popped up a dialog box saying I had the wrong processor.
I couldn't exit the software cleanly because every time I closed the dialog box so I could quit the program, it popped it up again.
App will quit after OK in Messagebox.
+69
Usefull for people getting the MHZ error, but temp works. Working on MHZ value.
Added / updated readme.
Same downloadlink, second tool is within the .sitx.
+1
+65
I have a 900MHz, 750 powerlogix card in my Pimso, and CPU Director is installed.
+69
Try to start terminal.
In terminal type:
sysctl hw.busfrequency
Whats the result ?
My G3 beige show this:
Andreas:~ ami$ sysctl hw.busfrequency
hw.busfrequency: 66820000 (meens 66,66 MHZ Bus)
Andreas:~ ami$
The programm needs busfrequenzy because some PL MACS have 66 some 100 (g3 b/w).
sysctl hw.PowerLogixHID1
an reply output be mail or here.
The result is an large, negative number.
hw.busfrequency: 50000000
hw.PowerLogixHID1: 1610612736
I am not using a Powerlogix board but CPU Director works fine with my XLR8 card.
+69
For users SAME PROBLEM / further communication use mail iceguy@freenet.de.
+69
" I use an older 50 mhz PCI Mac and have the same problem. My results from terminal are:
hw.busfrequency: 50000000
hw.PowerLogixHID1: 1610612736"
The second value means (there are some bits to test) Software PLL : disabled. My Tool cant get the PLL Bits of the 750FX if there is no 750FX CPU.
MHZ will only work, if you also can switch MHZ (PLL) by the CPU Director.
MHZ fixed systems (non G3 750FX/GX) should use my second tool, see readme in downloadfile.